x
≡ Menu
Home About Contact News Request form

Plastic Rebar Spacer PTL Standard (for compacted crushed stone or gravel surface)

Plastic Rebar Spacer PTL for compacted crushed stone or gravel surface 25-35 Plastic Rebar Spacer PTL for compacted crushed stone or gravel surface 30-40 Plastic Rebar Spacer PTL for compacted crushed stone or gravel surface 50-60

A series of plastic rebar spacers PTL Standard designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on for compacted crushed stone or gravel surface. Rebar spacers is used for easy installation on frames of all types of reinforcement bars (meshes) either steel or any composite materials.

For general description, the model range, additional applications, benefits and examples of using please see "Rebar Spacers" section.

The new design of PTL rebar spacers makes it possible to essentially safe your efforts and cost for reinforced concrete construction works: foundations, building frames and it's parts, floors, floor-levels, car roads sidewalks, bicycle & footpaths and so on.

Technical specification

Concrete cover layer, mm25-35, 30-40, 35-45, 40-50, 45-55, 50-60, 75-85 (two stacked rebar spacers 50-60), 100-110 (three stacked rebar spacers 50-60) and so on
Rebar / rebar mesh diameter, mm3 -16 (for plain bars)
3 -18 (for deformed bars)
Raw materialPolypropylene (primary)
ColorNeutral or bright (alarm) coloring (orange, red, blue, green, yellow, gray, white, black and others on request) to simplify the control of installation works
Loading forceBears the load 150 kg, destroy under static load on cross-bar over 300 kg
Recommended consumption per 1 m23-5 pcs
Snapping on reinforcing bar / meshSpecial snap petals allow spacers to be fixed on the bars and crosshairs in a wide range of diameters from 3 to 18 mm.

Spacer's free rotation and falling out is prevented.
Application (surface for installation)For installation on compacted crushed stone or gravel surface


manufacturer
PTL


If you are interested in plastic rebar spacer ptl standard (for compacted crushed stone or gravel surface) , you may:

More from section Rebar Spacers

  • manufacturer: PTL
A series of plastic rebar spacers PTL Chair designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on a hard base as formwork or rigid base. Rebar ...
  • manufacturer: PTL
A series of plastic rebar spacers PTL XL designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on compacted sand surface. Rebar spacers is used ...

© 2024 Plastic Technologies
8A Babushkina St
220024, Minsk
Belarus
                            

The site is powered by Nestorclub.com