Pipe Types and Sizes Compatible with PTL Clamps

PTL Plastic Multi-level Pipe Clamps can be used for mounting of plastic and metal pipes with a diameter of 16 to 65 mm on a threaded rods and screws.

Types and Sizes of Pipes and Hoses

Polypropylene pipes (2-4 m) for hot and cold water

Ø20 mm
Ø25 mm
Ø32 mm
Ø40 mm
Ø40 mm
Ø50 mm
Ø63 mm

Polyethylene pipes (in coils) for cold water

Ø16 mm
Ø20 mm
Ø25 mm
Ø32 mm
Ø40 mm
Ø50 mm
Ø63 mm

Polypropylene stable pipes (4m) for heating

Ø22 mm (labeled as 20 mm for 20 mm fittings, AL foil wrapping removal on the welding point)
Ø27 mm (labeled as 25 mm for 25 mm fittings, -//-)
Ø34 mm (labeled as 32 mm for 32 mm fittings, -//-)
Ø42 mm (labeled as 40 mm for 40 mm fittings, -//-)
Ø52 mm (labeled as 50 mm for 50 mm fittings, -//-)
Ø65 mm (labeled as 63 mm for 63 mm fittings, -//-)

Metal pipes (in coils) for hot and cold water heating

Ø16 mm
Ø18 mm
Ø20 mm
Ø25 mm
Ø26 mm
Ø32 mm
Ø40 mm

Polypropylene sewer pipes with sockets (in segments of different lengths)

Ø25 mm
Ø32 mm
Ø40 mm
Ø50 mm

Steel pipes (GOST 3262-75)

DN15 (for thread 1/2'')
DN20 (for thread 3/4'')
DN25 (for thread 1'')
DN32 (for thread 1 1/4'')
DN40 (for thread 1 1/2'')
DN50 (for thread 2’’)

PEX pipes (in coils) for floor heating

Ø1/2''
Ø3/4''
Ø1’’

Copper pipes water (in coils)

Ø17 mm
Ø21,3 mm
Ø26,8 mm
Ø5/8''
Ø7/8''
DN10 mm
DN15 mm
DN20 mm
DN25 mm
DN32 mm
DN40 mm
DN50 mm

Hoses (Dout = DN + 2 x wall thickness)

DN 10 mm
DN 12 mm
DN 16 mm
DN 18 mm
DN 20 mm
DN 25 mm
DN 32 mm
DN 40 mm
DN 50 mm

PVC, PU spiral hoses

DN 20 mm
DN 25 mm
DN 32 mm
DN 40 mm
DN 50 mm

For cables: corrugated pipes PP, PVC, PA

Ø16 mm
Ø20 mm
Ø25 mm
Ø32 mm
Ø40 mm
Ø40 mm
Ø50 mm
Ø63 mm

Hardware products and plugs for assembly and mounting

- Washer М8, М10, М12: DIN 125 - for threaded rods and screws;
- Washer M4, M5, M6: DIN 125 - for fixing the optional lugs;
- Washer M10: DIN 433 - for use with an M10 threaded rods, also used for centering stacked clamps in a multi-level case using an M8 threaded rod or a Ø8 screw;
- Washer М6: DIN 9021 - for use with М6 threaded rod or Ø6 screw;
- Nut M6, M10, M12: DIN 934 - for mounting on threaded rods of the appropriate size;
- Nut M4, M5, M6: DIN 934 - for use with fixing lugs;
- Decorative nut M8, M10, M12: DIN 986 (DIN 1587, DIN 917) - to cover the ends of the threaded rods;
- Screw with a semicircular head M4x16, M5x16, M6x20: DIN 7985 - for use with fixing lugs;
- Threaded rod M8, M10, M12: DIN 975 - is cut during installation into segments of the required length;
- Threaded rod&screw M8, M10 of the required length;
- Screw with hexagonal head Ø6x100, Ø6x100, Ø8x100, Ø8x100, Ø10x120, Ø10x140 and others: DIN 571;
- Dowel 10x50, 10x60; 12x60.12x70; 14x70.14x80; 16x80 - for Ø6-12 screws, threaded rod&screws Ø8, Ø10;
- Brass expandible anchor: M6, M8, M10, M12 - for installation of threaded rods;
- Steel expandible anchor: M6, M8, M10, M12 - for mounting threaded rods;