≡ Menu
Catalog manufacturer PTL
PTL is own brand of Plastic Technologies Ltd. Since the commissioning of the new production complex in 2017, we have opened a new direction - production of batched products from plastic. Designing, manufacturing of injection molds, and production of finished plastic products are carried out by our specialists using own equipment and areas of our plant at the address: 8A, Babushkina St., Minsk, Republic of Belarus
more
PTL Plastic Pipe Clamps can be used instead of traditional metal brackets, steel pipe hangers, various tube supports for installation of plastic or metal pipes and hoses on threaded rods or (and) screws . PTL Plastic Clamps can be installed closely ...
Plastic clamps PTL Beaver are designed for fastening plastic, metal-plastic, metal pipes and hoses to building structures and any surfaces made of metal, wood, concrete, foam concrete, bricks, etc. If you need more info send request to ...
A series of plastic rebar spacers PTL XL designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on compacted sand surface. Rebar spacers is used ...
A series of plastic rebar spacers PTL Standard designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on for compacted crushed stone or gravel ...
A series of plastic rebar spacers PTL Chair designed and manufactured by Plastic Technologies is dedicated to create a concrete cover of concrete structures from 25 to 160 mm and is recommended for use on a hard base as formwork or rigid base. Rebar ...
© 2025 Plastic Technologies
8A Babushkina St
220024, Minsk
Belarus
220024, Minsk
Belarus
The site is powered by Nestorclub.com